Search engine for touristic excursions to any place in the world SA-1 cylinder shape burrs are great for interior contour work and deburring. As a result of extreme hardness on this tungsten carbide, you can use it on a lot more demanding jobs than HSS (High-Speed Steel). These carbide burrs are constructed with tungsten carbide burr die grinder bits and may begin to soften at higher temperatures, so carbide is always the best choice for long-term performance.
Double cut or Cross cut carbide burrs usually are suited for ferrous and non-ferrous metals, soft steel, and for all non-metal materials like stone, plastics, wood floor, and ceramic. Double cut burrs leaves a rather smoother finish than single cut due to producing smaller chips since they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and can see you through most applications.
Cut – Double Cut
Max RPM – 70,000, yet it’s uncommon to need more than 35,000 RPM.
Machines Applied to:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Certain, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined from the material you’re using your burr on. If you’re experiencing chipping, you’re operating at too much of speed for your application. Start with a slower speed while increasing during this process before you get the the best results
Apply light pressure and allow the tool perform the work. Bearing upon the tool can result in reduced tool life plus a dull burr.
Always wear proper PPE to include (although not tied to) safety glasses, hearing protection, respirator, and baseball gloves. Keep all guards set up on the machine.
Avoid use on electrical energy drills; the slower speeds can result in chipping of one’s workpiece.
For more details about SA-1 Carbide Burrs go our web portal