Search engine for touristic excursions to any place in the world SA-3 cylinder shape burrs are ideal for interior contour work and deburring. As a result of extreme hardness on this tungsten carbide, technology-not only on much more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs usually are utilized on ferrous and non-ferrous metals, soft steel, as well as all non-metal materials such as stone, plastics, wood floor, and ceramic. Double cut burrs leaves a slightly smoother finish than single cut due to producing smaller chips while they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and will look at you through most applications.
Machines Suited for:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are perfect for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined from the material you are using your burr on. If you happen to be experiencing chipping, you are most probably operating at too high of speed for the application. Start with a slower speed while increasing as you go along unless you reach the the best results
Apply light pressure and let the tool carry out the work. Bearing upon the tool will lead to reduced tool life along with a dull burr.
Always wear proper PPE to add (however, not limited to) safety glasses, hearing protection, respirator, and work gloves. Keep all guards set up on the machine.
Avoid experience electrical power drills; the slower speeds can result in chipping of one’s workpiece.
Check out about SA-3 Carbide Burrs go our new web site