Common Problems With iPhone Repairs

For those who have purchased a do-it-yourself iPhone repair kit, it is not uncommon to encounter a couple of snags through the iPhone repair process. Breathe deeply, these are generally easily avoided or corrected with the appropriate instructions and also the right tools. If you have not yet begun the iPhone repair process, it’s a good option to read through this article to understand the most frequent conditions that sometimes arise so that you can stay away from them altogether.

The most important thing to keep in mind when performing DIY iPhone repair is usually to purchase quality repair parts. Be sure you only buy a repair kit from your trustworthy source with guaranteed parts. Using parts which aren’t guaranteed will only lead to more difficulties with your iPhone ultimately. Trusted iPhone repair shops will offer you having a complete repair kit that includes the top parts and tools, detailed instructions, customer satisfaction if you happen to encounter any issues, plus a warranty.

Here are the most common iphone4 repair issues:

Antenna Issues

In case you finish repairing your iPhone only to discover your phone doesn’t have signal, it can be a worry with the antenna. Sometimes when the antenna is disconnected the metal around the antenna connection could possibly get slightly bent. Work with a nylon spudger to carefully complete the metal before trying to reconnect the antenna again.

When reattaching the antenna here are a few items to remember:

– Remember, you will find four teeth that ought to be correctly placed directly under the iphone4 frame

– Make sure the screw holding together the speaker assembly is screwed down tightly

– Make certain the antenna wire is securely clipped upon the logic board

In case you are still not receiving a transmission, try resetting your network connections.

Logic Board Issues

In case you are having problems detaching the logic board, it will be possible that not every one of the screws happen to be removed. The logic board is held in place by three screws and the Sim. One of the three screws is roofed with a white water river sensor. The SIM card hold the logic board available get the job done screws are already removed. To only sign up for the Sim make use of a thumb tack or paper clip to gently press in for the SIM card tray and will also slide out.

To soundly take away the logic board it’s best to start at the base and gently pick up. Remember, you can find 6 connections that must be unclipped through the logic board before it is removed. Make certain that the logic board doesn’t touch the antenna connection throughout the iPhone repair process.

iphone4 Battery Replacement

When replacing the car battery within your iPhone, be sure you NOT use any metal instruments when taking out the electrical connection. This could increase the risk for electrical connection short circuiting. Instead work with a nylon spudger often incorporated into iPhone repair kits.

When detaching the battery, the plastic pull tab sometimes tears off. Using a tool such a nylon spudger like a lever to carefully pry it out works better.

If you find your iPhone will not switch on after performing iPhone repair, first, check to ensure that it is securely connected. If the battery was reattached properly, get a hard reset on the phone (press and support the Sleep/Wake button along with the Home button for 10-seconds prior to the Apple logo appears). If thay man hinh iphone tphcm will not correct the situation, plug your phone in the power outlet or connect to iTunes.

To learn more about thay man hinh iphone webpage: click to read more.

Leave a Reply